Fire Fighting System
Fire Sprinkler
We supply Sprinklers with certifications only such as UL Listed, FM Approved and LPCB approved since they are important to prevent from possible risks. Our Brands are USA origin and Korea Origin. Different types of sprinklers are available such as Pendent, Upright, Conventional, Sidewall and Concealed. Bust Temperatures requirements are based on different Designs approved.
Note: Non-approved and Non-listed sprinklers are not available
Dry / Wet Riser System
Landing Valves are normally installed in Main Risers, dry and wet, Dry Riser Valves wait for water to be supplied by Fire Trucks and Wet Ricer Valves use the water from the standby pressurerized water in Riser Pipes fed by standby Fire Pumps.
Breaching Inlet: is a non-return type Inlet which is installed mostly outside of the building to supply water from fire pumps and fire engines, so to boost pressure on the fire sprinkler pipelines of the buildings. They either 2 way or 4 way are also used in dry riser system and wet riser system to enable fire men to connect into those systems.We can also supply FM approved, UL Listed and LPCB approved materials based on individual’s needs.
Hose Reel / Hose Rack System
Fire Hose Reels usually come 25mm in Diameter and 30m in length with reel and nozzle. Hose Racks are 40mm in diameter and 30 m in length with its own gate vlave and nozzle. They are installed indoor and driven by Standby and Duty Pumps.
We can also supply FM approved, UL Listed and LPCB approved materials based on individual’s needs.
Fire Hydrant System
A Hydrant is a connection point by which fire fighters can tap into a water supply. In most areas, Fire Hydrants require annual inspections and maintenance.
We can also supply FM approved, UL Listed and LPCB approved materials based on individual’s needs.
When we have to use steel pipes underground according to different requirements of different projects, we make sure steel pipes are property wrapped with anti-corrosion chemicals and tapes to last life of those pipes.
HDPE – We use High Density Polythylene Pipes when pipes are required to run underground in order to prevent ruining pipes and make sure pipes can resist the high water pressure like steel pipes.
